CoreLock by Wire-Bond

By Masonry

The CoreLock Rebar Positioner fits inside the wall reinforcing and down into the CMU core.

Wire-Bond, manufacturer of masonry wall reinforcing, anchors and accessories, recently introduced the CoreLock series of rebar positioners. The CoreLock Rebar Positioner fits inside the wall reinforcing and down into the CMU core. This recess of 1 1/4-inch into the core, as well as the diagonal design of the positioner, secures it down in the core. Once installed, it cannot be bumped or misaligned. Placement of the rebar in the middle of the core is assured, which results in labor savings.

Different styles are available to suit the needs of most wall sizes and applications. The figure-8 design is available for six — through 12-inch blocks. Double figure-8 designs are available for multiple bars. The Big O Positioner has a larger hole that can help simplify lapping, while keeping the rebar centered.

Positioners are packaged in a tangle-proof box for easy installation on the job. Available in mill galvanized, hot dipped and stainless steel. For more information, visit www.wirebond.com.

About the Author

Masonry, the official publication of the Mason Contractors Association of America, covers every aspect of the mason contractor profession - equipment and techniques, building codes and standards, business planning, promoting your business, legal issues and more. Read or subscribe to Masonry magazine at www.masonrymagazine.com.